Compression Elbow Fittings

Compression elbow fittings are a practical choice when you need to change the direction of pipework without soldering. By tightening the compression nut, the olive is compressed between the fitting body and the pipe to form a mechanical seal, which makes these fittings useful for repairs, alterations and new work alike. They are especially handy where access is tight, the property is occupied, or using heat would be awkward. If you want a joint that can usually be dismantled later for maintenance or changes, compression elbows are often a sensible route.

The main job of an elbow is to turn the pipe run around a corner or obstacle without bending the pipe itself. In this collection, many options are 90 degree elbows, with equal versions for keeping the same pipe size and reducing versions for stepping down between sizes where needed. That choice matters on site. An equal elbow suits a straightforward change of direction, while a reducing elbow helps when the new run or connected component needs a smaller size.

Size is the first buying check. This range covers small domestic sizes through to larger pipework, including options such as 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm and 54mm, plus selected reducing patterns. You will also find wallplate elbows in the range, which are useful where the fitting needs to terminate neatly at a fixed point. Before choosing, match both connection sizes and the elbow pattern to the layout you are building or altering.

Finish can make a difference too. Brass options are a standard choice for general hidden or service areas, while chrome plated elbows can make more sense where the fitting may remain on show. Catalogue data in this collection also shows products with approvals and ratings such as WRAS approval, BS EN 1254-2 and BS EN 1057 on listed items, but it is still worth checking the exact product details for your pipe material, application and system conditions rather than assuming every elbow suits every job.

If you already know you want a mechanical joint but need a different fitting shape, take a look at the wider Compression Fittings range. If the pipe needs to turn, though, choosing the right compression elbow usually comes down to four checks: angle, size, equal or reducing pattern, and whether a plain or chrome finish makes more sense for the installation.