Lever Arm Ball Valves

Lever arm ball valves are a practical choice when you need fast, easy shut-off on compatible pipework. The quarter-turn handle gives clear open or closed operation without repeated twisting, which helps at maintenance points, plant areas and any installation where you may need to isolate a line quickly. For many jobs, the biggest advantage is simply being able to see the valve position at a glance and operate it confidently by hand.

Across this range, you can compare common compression sizes from 15mm up to 54mm, making it easier to match existing copper pipework or plan a new section properly. That gives you options for smaller domestic runs as well as larger commercial or plant-room pipework. If you are replacing an existing valve, matching the pipe size and connection type is the first check. Compression ends can be a straightforward option where they suit the pipe and installation method already in place.

Service suitability matters just as much as size. In this collection, supplied product data supports use across water, gas and fuel applications, but that does not mean every valve should be treated as interchangeable. Check the individual product specification for the exact application, pressure rating and any approvals you need for the job. Brass construction appears across the range, and WRAS approved options are present where that approval is required for your selection.

It is also worth comparing bore design rather than assuming one format across the whole range. Ball valves are intended for isolation, not fine flow adjustment, so the key buying difference is whether you need a particular bore type, connection detail or service approval on that line. Handle clearance is another important point. The lever needs room to sweep through its full quarter turn, so allow for nearby walls, cupboards and neighbouring pipework before you choose.

If you know you want visible, accessible shut-off rather than a harder-to-reach control, this collection keeps the choice focused on lever-operated valves. Start with pipe size, confirm the service and pressure details on the product page, then check body and handle clearance for the space available. If you are still comparing valve styles, the wider Ball Valves range is a useful next step.